Power Sluices

Like the original gold buddy this is a self contained unit with many uses - PROSPECTING, SAMPLING, CONCENTRATE CLEANUP. This handy durable plastic storage box doubles as the water storage reservoir in this cleverly designed prospecting tool. This is a higher volume high banker than the original Gold Buddy and is designed to be set up as a traditional power sluice. The sluice/hopper is 42 inches long and has an adjustable four leg stand to conform to any terrain. The sluice/hopper comes in two sections and the entire assembly requires only 3 wing nuts. The hopper is 10 inches wide and 15 inches long. The sluice is 7 1/2 inches wide and 27 inches long. The unit can be set up to recirculate its own water or in a lake or stream as, a traditional power sluice. Powered by a 12 volt 1250 gph electric pump which draws only 2.6 amps, the 15 gallons of water required to fill the unit is recirculated until all your material is processed. The components all store compactly and safely in the container. Comes complete with 2 tailings buckets. The total weight of the components packed in the case is 22 pounds. The components set up to backpack weigh only 14 pounds. Please Note: The size of the packing case / water reservoir is subject to change.

Like the original gold buddy this is a self contained unit with many uses - PROSPECTING, SAMPLING, CONCENTRATE CLEANUP. This is a much higher volume hibanker than the original Gold Buddy, but is designed like the original with a two stage classifier sluice. The upper stage, which contains the classifier screen, is 21 inches long and 9 inches wide. The lower level sluice is 24 inches long, 9 inches wide and 3 3/4 inches tall. It is attached to a sluice stand which has four adjustable legs to conform to any terrain. The unit can be set up to recirculate its own water or in a lake or stream as, a traditional power sluice. It is powered by a 12 volt 1250 gph electric pump which draws only 2.6 amps. The total weight of the V1250 Hibanker is only 14 pounds.

This unit combines all the accessories you need to do both Hibanking and Dredging. This is a very versatile tool for shallow water prospecting and dredging. Includes A-52 Hand Sluice Highbanker Hopper and Dredge Adapter Sluice Frame Sluice Extension Honda Engine Pump Assembly Hoses and Suction Nozzle Dredging Riffle Classifier Screen

The JOBE Power Sluice is designed around the JOBE 48 inch Yellow Jacket stream sluice. The JOBE adjustable 4 leg stand and the JOBE Power Sluice header box are attached to the sluice. Powered by a JOBE 2 1/2 hp, 4-cycle, gasoline pump. The pump and engine combination weighs only 27 pounds and is mounted on a shock-resistant base plate with a carry handle. It can also be set up with a recovery tub to complete a power sluice recirculating system. Includes 6 feet of 1 1/2 inch intake hose, an intake screen, 25 feet of 1 1/2 inch lay-flat discharge hose, and all necessary fittings. The sluice also comes with an aluminum flare, not shown, which replaces the Power Sluice Header Box so that the sluice can also be used as a normal stream sluice.

The JOBE 36 is 10 inches wide and 36 inches long weighing only only 8 pounds.

Converts your stream sluice into a power sluice or hibanker. All precision laser cut aluminum construction. Works on the JOBE 45 Yellow Jacket, the Keene A52, or any 10 inch wide sluice. The mounting holes are precut to bolt onto the JOBE sluice and the JOBE sluice stand. Mounting to the Keene A52 requires two 1/4" holes to be drilled on the sides of the header box. Weighs only 3 pounds.

Use this quality precision laser cut aluminum Hibanker / Dredge Hopper to convert your stream sluice into a Hibanker or dredge. The classifier screen is removable and is made of powder coated steel. The top of the hopper is 18 inches x 18 inches with spray bars. The water inlet is equipped with a 1 1/ 2 inch slip fitting which can be removed to use 1 1/2 inch pipe fittings. The water supply can be adjusted with a valve which is included. Comes ready to go as a 2 inch dredge hopper and can be easily modified to use with a 2 1/2 inch dredge. Works on the JOBE 45 Yellow Jacket, the Keene A52, or any 10 inch wide sluice. The mounting holes are precut to bolt onto the JOBE sluice and the JOBE sluice stand. Mounting to the Keene A52 requires two 1/4" holes to be drilled on the sides of the hopper. Total weight is just 14 pounds. The removable classifier screen weighs 5 1/ 2 pounds.

This quality lightweight water pump is powered by a 2 1/2 horse power, 4 cycle gasoline engine. The pump and engine combination weighs only 27 pounds and is mounted on a shock-resistant base plate with a carry handle. The intake and discharge are both 1 1/2 inch with a maximum discharge of 3170 gph ( 52.8 gpm). The suction head is 13 feet and the discharge head is 82 feet. 90 Day warranty. Sorry boys not Available in California. Made in China.#-6525